|
Operation
A few simple settings are all that's required for the operational control of the microzone system!
To automatically maintain the best possible thermal environment for farrowing and nursery operations, the system includes a built-in temperature sensor to automatically adjust power output to match heating needs.
MicroZone Operation Manuals Available:
Quick Reference Guide
Operations Manual
Operations Manual (Spanish)
Installation
Installation of the Automatic Lamp & Mat Heating Control is very easy.
Please take a look at the simple installation manual.
If help is required, a qualified electrician is recommended.
MicroZone Installation Manuals Available:
Installation Manual
Installation Manual (Spanish)
Specifications
Operating Environment: 0° F to 105°F, 10 to 95% Relative Humidity (indoor use only)
MicroZone MC100 input power: MPS 100 or 9 Volts(DC) equivalent.
MPM100 Power Modulator input power: 90 – 130V, 50/60 HZ
MPM100 Power Modulator load rating: 16A maximum (1,920 Watts @ 120VAC)
MPM100 Power Modulator load types: Incandescent heating lamp and/or resistive heating pad
Temperature sensing probe error: Less than 2° F
Electrical protection: Short circuit, overload and voltage surge
Noise filter: FM radio filter
Enclosures: Weather tight (approximately 4” x 4” x 2”)
Temperature control: Automatically adjusts power to lamps or mats to compensate for fluctuations in room temperature.
Temperature Ramping: Automatically decreases temperature as pigs get older.
Soft Start: Slowly restores power after an outage to reduce peak demand on the power utility or a backup generator. Helps extend lamp life.
Internal Protection: The control is protected against transient voltage spikes, thermal overload and short circuits in heating devices.
|